Skip to main content
10662121 Circuit Modeling 1
Course Information
Description
This course explores electrical engineering concepts including voltage, current, resistance, impedance, Op-amps, phasors, Ohms law, Kirchoff’s laws, superposition, Thevenin’s and Nortons theorems applied to the modeling of zero-order networks, Complex numbers and algebra.
Total Credits
3

Course Competencies (Course Outcomes)
  1. Apply electrical engineering principles including voltage, current, resistance, power, Ohm’s Law, and Kirchhoff’s Laws to analyze electrical circuits
    Assessment Strategies
    Written problem sets, exam
    Criteria
    Define voltage, current, resistance, and power
    Identify circuits with SI units and symbols
    Calculate an unknown voltage, current, or resistance in a series, parallel, or series-parallel circuit (Ohm’s Law)
    Determine power dissipated or supplied by circuit components
    Calculate the equivalent resistance of series, parallel, and series-parallel combinations with no calculation errors
    Use node equations to solve for unknown branch currents in circuits with at least 3 branches (Kirchhoff's Current Law)
    Use consistent polarity conventions to solve for unknown voltages in circuits with at least 2 loops (Kirchhoff's Voltage Law)

  2. Formulate and solve circuit equations to determine voltage, current, and power in electrical networks
    Assessment Strategies
    Written problem sets, exam
    Criteria
    Translate a circuit schematic into a set of independent equations using KCL and KVL
    Write the same number of independent equations as unknowns
    Label node voltages, branch currents, and polarities
    Formulate equations for circuits with at least 2 sources and 3 unknowns
    Solve systems of 2 or 3 linear equations using substitution, elimination, or matrices
    Determine the voltage, current, and power for each circuit element
    Verify solutions by confirming that power supplied equals power absorbed

  3. Analyze electrical circuits using systematic techniques including nodal analysis and mesh analysis
    Assessment Strategies
    Written problem sets, exam
    Criteria
    Write nodal equations for circuits with up to 3 non-reference nodes
    Write mesh equations for circuits with up to 3 meshes
    Apply supernode and supermesh techniques when a circuit contains a voltage or current source shared between nodes or meshes
    Solve the resulting equations for all unknown voltages and currents
    Select the method (nodal or mesh) that requires fewer equations and justify the choice
    Verify results using KCL, KVL, or a power balance

  4. Evaluate circuits containing independent and dependent voltage and current sources
    Assessment Strategies
    Written problem sets, exam
    Criteria
    Distinguish independent sources from dependent sources
    Identify the four dependent source types (VCVS, VCCS, CCVS, CCCS)
    Identify the controlling variable of each dependent source
    Analyze circuits containing independent voltage and current sources
    Write equations for circuits with at least 1 dependent source, expressing the controlling variable in terms of the circuit unknowns
    Determine the power absorbed or supplied by each source

  5. Apply circuit theorems to simplify and solve circuit problems
    Assessment Strategies
    Written problem sets, exam
    Criteria
    Apply superposition to circuits with at least 2 independent sources, deactivating the other sources correctly
    Apply source transformations to simplify circuits
    Determine the Thévenin equivalent (Vth and Rth) of a circuit at specified terminals
    Determine the Norton equivalent (In and Rn) of a circuit at specified terminals
    Convert between Thévenin and Norton equivalent circuits
    Apply delta–wye transformations to reduce resistor networks
    Draw the simplified equivalent circuit with labeled values
    Verify that the equivalent circuit produces the same load voltage and current as the original circuit

  6. Design basic operational amplifier circuits
    Assessment Strategies
    Written problem sets, exam (sketch and design)
    Criteria
    State the ideal op-amp assumptions (infinite gain, zero input current, virtual short)
    Analyze inverting, non-inverting, summing, difference, and voltage follower configurations
    Calculate the voltage gain of each configuration
    Analyze op-amp circuits using nodal analysis and superposition
    Analyze cascaded op-amp stages and determine the overall gain
    Design an inverting amplifier for a specified gain using standard resistor values
    Design a non-inverting amplifier for a specified gain using standard resistor values
    Sketch op-amp circuit schematics with labeled components and connections
    Determine whether the output is limited by the supply voltage (saturation)

  7. Analyze the behavior of capacitors and inductors in DC and AC circuits
    Assessment Strategies
    Written problem sets, exam (time-based analysis)
    Criteria
    Calculate equivalent capacitance for series and parallel combinations
    Calculate equivalent inductance for series and parallel combinations
    Describe the steady-state behavior of capacitors and inductors in DC circuits
    Compute capacitor current from voltage using i = C dv/dt
    Compute inductor voltage from current using v = L di/dt
    Compute capacitor voltage and inductor current from a given waveform using integration
    Calculate the energy stored in a capacitor and in an inductor
    Determine the phase relationship between voltage and current for capacitors and inductors in AC circuits

  8. Use complex numbers to analyze electrical circuits
    Assessment Strategies
    Written problem sets, exam
    Criteria
    Convert complex numbers between rectangular and polar forms with no calculation errors
    Add and subtract complex numbers in rectangular form
    Multiply and divide complex numbers in polar form
    Calculate the complex conjugate of a given number
    Express results with correct notation, including units and angle in degrees or radians
    Use complex numbers to calculate impedance and current in a simple AC circuit

  9. Apply phasor analysis and complex impedance concepts
    Assessment Strategies
    Written problem sets, exam
    Criteria
    Convert sinusoidal voltages and currents between the time domain and phasor form
    Calculate capacitive reactance at a specified frequency
    Calculate inductive reactance at a specified frequency
    Calculate the equivalent impedance of series, parallel, and series-parallel RLC combinations in rectangular and polar form
    Calculate admittance, conductance, and susceptance from a given impedance
    Convert an AC circuit to its phasor-domain equivalent
    Solve AC circuits using nodal analysis, mesh analysis, superposition, and Thévenin or Norton equivalents
    Determine the phase angle between voltage and current
    Verify results using KVL and KCL in phasor form

  10. Use laboratory instruments including multimeters and oscilloscopes to measure electrical quantities
    Assessment Strategies
    Pre-lab demonstration, practical exam
    Criteria
    Set the voltage and current limit on a DC power supply before connecting it to a circuit
    Configure a function generator for a specified waveform, frequency, amplitude, and offset
    Measure DC voltage, current, and resistance with a multimeter using the correct connections and range
    Use an oscilloscope to measure amplitude, period, frequency, and phase using correct probe, coupling, and trigger settings
    Obtain measurements within 5% of expected values
    Record measurements with correct units

  11. Construct electrical circuits on a breadboard using power supplies and function generators
    Assessment Strategies
    Skill demonstration in lab, exam
    Criteria
    Identify the connected rows and power rails of a breadboard
    Select components with the correct values using color codes or measurement
    Build a circuit from a schematic with no wiring errors
    Connect power supplies and function generators to the circuit correctly
    Measure voltages and currents at specified test points
    Compare measured values to calculated values and determine the percent difference
    Organize wiring so that connections can be traced and checked

  12. Troubleshoot electrical circuits using systematic diagnostic techniques
    Assessment Strategies
    Skill demonstration in lab
    Criteria
    Follow a systematic procedure (verify symptoms, inspect, check power, isolate the fault)
    Use a multimeter or oscilloscope to measure at test points
    Compare measured values to expected values to locate the fault
    Identify common faults, including open circuits, short circuits, incorrect component values, and wiring errors
    Diagnose the fault in an assigned malfunctioning circuit within the allotted time
    Correct the fault and verify that the circuit operates as designed

  13. Follow laboratory safety procedures when working with electrical equipment
    Assessment Strategies
    Safety quiz, skill demonstration
    Criteria
    Identify electrical hazards, including shock, short circuits, overheated components, and stored charge in capacitors
    Locate the emergency shutoff, fire extinguisher, and first aid supplies in the laboratory
    Turn off and disconnect power before changing a circuit
    Discharge capacitors before handling a circuit
    Wear required personal protective equipment
    Handle equipment and cables according to laboratory procedures

  14. Analyze electrical circuits using SPICE-based simulation software
    Assessment Strategies
    Project
    Criteria
    Draw circuit schematics in PSpice or Multisim with correct components, values, and ground reference
    Run DC operating point, transient, and AC analysis simulations
    Measure voltages and currents in the simulation using probes or measurement tools
    Compare simulation results to hand calculations and determine the percent difference
    Explain any difference greater than 5% between theory and simulation
    Simulate at least one op-amp circuit and one circuit containing capacitors or inductors
    Present simulation results with labeled schematics and waveforms

  15. Prepare technical laboratory reports
    Assessment Strategies
    Written lab report
    Criteria
    Use standard symbols, with labeled component values
    Report includes data in tables with labeled columns, correct units, and significant figures
    Report includes graphs with titles, labeled axes, and units
    Use percent error to compare measured, calculated, and simulated values
    Identify at least two sources of error when results differ from expected values
    Conclusions are supported by the data
    Report includes all required sections