Skip to main content
10605143 Motors and Controls
Course Information
Description
Covers industrial motor controls, electromechanical and solid-state control devices, and AC and DC rotating machinery. Topics include electrical safety, standard NEMA/IEC symbology, ladder logic diagrams, control transformers, electromechanical relays, contactors, magnetic motor starters, reversing circuits, timing and counting functions, reduced-voltage starting, braking and stopping methods, variable frequency and DC drives, power distribution, and programmable logic controllers (PLCs). Laboratory work emphasizes software simulation, hardwired relay logic wiring, and hands-on operation and testing of AC and DC motors, generators, and industrial control systems. 
Total Credits
3

Course Competencies (Course Outcomes)
  1. Apply electrical safety practices in industrial motor control environments
    Assessment Strategies
    Written exam
    Laboratory safety audit
    Instructor observation
    Criteria
    Identify electrical hazards including shock, arc flash, and arc blast according to NFPA 70E standards
    Perform lockout/tagout (LOTO) procedures correctly before working on motor control equipment
    Select and wear appropriate Personal Protective Equipment (PPE) for motor control tasks
    Verify zero energy state using properly rated test instruments
    Demonstrate safe habits during the setup, testing, and troubleshooting of rotating electrical machinery

  2. Interpret electrical symbols and industrial control diagrams
    Assessment Strategies
    Written exercises
    Schematic reading exam
    Simulation exercises in The Constructor
    Criteria
    Identify standard NEMA and IEC electrical symbols for control and power circuit devices
    Interpret ladder diagrams, wiring schematics, one-line diagrams, and terminal wire lists
    Differentiate between power circuit conductors and control circuit conductors
    Translate electrical ladder diagrams into corresponding physical wiring layouts
    Develop and simulate basic motor control schematics using The Constructor simulation software

  3. Analyze and implement electromechanical relay control logic
    Assessment Strategies
    Laboratory exercises
    Circuit simulation
    Practical skill demonstration
    Criteria
    Explain the operating principles, coil ratings, and contact configurations (NO/NC) of control relays
    Implement basic logic functions (AND, OR, NOT, memory/seal-in) using hardwired relay contacts
    Construct and verify an Andon visual/audible signaling status circuit in the laboratory
    Construct and test a Jeopardy (first-come interlock) lockout circuit
    Troubleshoot relay coil and contact failures using a digital multimeter

  4. Implement mechanical input control devices and solenoids
    Assessment Strategies
    Laboratory exercises
    Practical skill demonstration
    Exam
    Criteria
    Differentiate between momentary and maintained mechanical input devices (pushbuttons, selector switches, limit switches)
    Identify the operation and applications of industrial solenoids and mechanical actuators
    Wire manual input control devices into standard start/stop and two-wire/three-wire control circuits
    Verify circuit operation in response to mechanical limits, operator inputs, and solenoid actuation

  5. Analyze control transformers and control power circuits
    Assessment Strategies
    Laboratory exercises
    Written problem sets
    Exam
    Criteria
    Explain the principles and purpose of industrial control transformers in motor circuits
    Calculate primary and secondary voltages, currents, and VA capacity requirements
    Select proper primary and secondary overcurrent protection (fuses and circuit breakers)
    Identify proper grounding and bonding practices for grounded and ungrounded secondary circuits
    Measure primary and secondary voltages under loaded and unloaded conditions

  6. Apply contactors and magnetic motor starters
    Assessment Strategies
    Laboratory exercises
    Practical exam
    Criteria
    Differentiate between magnetic contactors and magnetic motor starters
    Explain the operating principle and sizing of thermal and electronic overload relays
    Distinguish between two-wire (low-voltage release) and three-wire (low-voltage protection) control circuits
    Wire magnetic motor starters with start/stop pushbuttons and auxiliary holding contacts
    Implement jogging and inching control configurations using pushbuttons and selector switches
    Measure operating coil voltages, contact voltage drops, and motor load currents

  7. Implement motor reversing and interlocking circuits
    Assessment Strategies
    Laboratory exercises
    Practical skill demonstration
    Criteria
    Explain the theory and phase-reversal requirements for reversing three-phase and single-phase AC motors
    Describe the necessity of mechanical and electrical interlocking in reversing starters
    Wire mechanical, electrical, and pushbutton interlocks in reversing motor control circuits
    Verify forward, reverse, and stop sequence operation under laboratory conditions
    Troubleshoot interlocking faults that cause simultaneous starter engagement or failure to reverse

  8. Implement safety interlocking and anti-tiedown circuits
    Assessment Strategies
    Laboratory project
    Circuit simulation
    Practical skill demonstration
    Criteria
    Explain the industrial safety purpose and OSHA/ANSI requirements for two-hand anti-tiedown controls
    Design and simulate an anti-tiedown control circuit in The Constructor software
    Construct a hardwired two-hand anti-tiedown safety circuit using pushbuttons and relays
    Verify that holding down one or both pushbuttons prevents inadvertent machine recycling
    Demonstrate fail-safe operation and compliance with machine operator safety principles

  9. Implement timing and counting functions in motor control circuits
    Assessment Strategies
    Laboratory exercises
    Practical demonstration
    Criteria
    Differentiate between On-Delay (DOE), Off-Delay (DODE), and interval timing functions
    Interpret timer contact symbols (NOTC, NOCT, NCTC, NCCT) and timing state diagrams
    Wire electromechanical and solid-state timing relays into motor control circuits
    Implement timed sequence starting and stopping for multiple motors
    Construct a hardwired multi-stage motor sequencing circuit in the laboratory
    Apply industrial counting relays and counters to automate cyclic motor operations

  10. Implement motor stopping and braking methods
    Assessment Strategies
    Laboratory exercises
    Exam
    Criteria
    Describe mechanical friction braking, plugging, dynamic braking, and DC injection braking methods
    Explain the operation of zero-speed plugging switches in motor deceleration
    Wire plugging control circuits for rapid deceleration of AC induction motors
    Connect and test DC injection braking systems on three-phase motors
    Measure stopping time and evaluate deceleration performance across different braking topologies

  11. Analyze and operate DC generators and DC motors
    Assessment Strategies
    Laboratory exercises
    Written exam
    Criteria
    Identify the physical components of DC machines including armature, commutator, brushes, and field poles
    Analyze the operational characteristics of permanent magnet, series, shunt, and compound DC machines
    Wire and operate DC generators under varying electrical load conditions
    Measure speed, torque, counter-electromotive force (CEMF), and armature current in DC motors
    Implement manual and magnetic DC motor starting circuits to limit inrush current
    Control DC motor speed through field weakening and armature voltage adjustment
    Compare measured DC motor torque-speed curves with theoretical machine equations

  12. Analyze and operate AC generators and AC motors
    Assessment Strategies
    Laboratory exercises
    Written exam
    Criteria
    Explain the generation of rotating magnetic fields in three-phase stator windings
    Calculate synchronous speed, slip, rotor frequency, and full-load torque for AC induction motors
    Differentiate between single-phase motors (split-phase, capacitor-start, shaded-pole) and three-phase squirrel-cage motors
    Wire single-phase and three-phase AC induction motors to power sources
    Measure starting current, running current, power factor, and slip under mechanical loading
    Explain the operating principles, excitation, and power factor correction capability of synchronous motors and AC alternators

  13. Apply solid-state relays, starters, and semiconductor control devices
    Assessment Strategies
    Laboratory exercises
    Written problem sets
    Exam
    Criteria
    Differentiate between electromechanical relays and solid-state relays (SSRs) regarding switching speed, isolation, and wear
    Explain the operation of power semiconductors (diodes, SCRs, TRIACs, and MOSFETs) in power switching
    Wire solid-state relays and solid-state contactors to control inductive motor loads
    Identify thermal management, heatsinking, and transient voltage suppression requirements for solid-state devices
    Troubleshoot solid-state switching circuits using multimeters and oscilloscopes

  14. Evaluate motor load, torque, and power quality requirements
    Assessment Strategies
    Laboratory exercises
    Written analysis
    Exam
    Criteria
    Interpret NEMA motor nameplate data including service factor, design letter, insulation class, code letter, and efficiency
    Classify driven mechanical loads (constant torque, variable torque, constant horsepower)
    Calculate motor acceleration torque, full-load torque, and locked-rotor torque
    Evaluate the impacts of voltage unbalance, voltage sags, harmonics, and low power factor on motor heating and lifespan
    Determine power factor correction capacitor requirements for industrial motor installations

  15. Implement reduced-voltage starting methods
    Assessment Strategies
    Laboratory exercises
    Exam
    Criteria
    Explain the reasons for reducing starting inrush current and mechanical stress on power distribution systems
    Compare primary resistor, autotransformer, wye-delta (star-delta), and solid-state soft-start methods
    Wire and operate primary resistor reduced-voltage starting circuits
    Wire and operate wye-delta reduced-voltage motor starting circuits
    Measure and compare inrush starting currents and starting torques between across-the-line and reduced-voltage methods

  16. Analyze and configure electronic motor drives (AC and DC)
    Assessment Strategies
    Laboratory exercises
    Practical demonstration
    Criteria
    Describe the internal architecture of Variable Frequency Drives (VFDs): rectifier, DC bus filter, and PWM inverter
    Explain the operating principles of silicon-controlled rectifier (SCR) based DC drives
    Configure fundamental VFD parameters including min/max frequency, acceleration/deceleration ramps, and motor nameplate data
    Wire two-wire and three-wire control inputs, speed potentiometers, and analog reference signals to a VFD
    Operate and test three-phase AC motors under variable frequency and variable voltage control
    Troubleshoot motor drive fault codes and operational alarms

  17. Analyze industrial power distribution and smart grid systems
    Assessment Strategies
    Written exercises
    Case study analysis
    Exam
    Criteria
    Describe the architecture of industrial power distribution from utility substations to motor control centers (MCCs)
    Identify the function of switchgear, busways, panelboards, disconnect switches, and protective relays
    Explain feeder sizing, short-circuit current ratings (SCCR), and overcurrent coordination
    Explain smart grid concepts including automated demand response, peak shaving, and energy monitoring in industrial facilities

  18. Apply programmable logic controllers (PLCs) in motor control systems
    Assessment Strategies
    Laboratory exercises
    Ladder logic programming assignment
    Practical demonstration
    Criteria
    Identify the core components of a PLC system: power supply, CPU, I/O modules, and programming terminals
    Interface input devices (pushbuttons, limit switches) and output actuators (motor starter coils, indicator lights) to PLC I/O modules
    Convert hardwired relay ladder schematics into PLC ladder logic programs
    Implement seal-in contacts, internal bit flags, timers (TON/TOF), and counters (CTU/CTD) in PLC ladder routines
    Download, test, and troubleshoot PLC programs controlling physical motor starters and industrial loads

  19. Troubleshoot industrial motor control circuits and rotating equipment
    Assessment Strategies
    Laboratory troubleshooting practical
    Instructor fault insertion
    Skill demonstration
    Criteria
    Follow a systematic troubleshooting methodology to locate and isolate electrical and mechanical faults
    Use digital multimeters, clamp-on ammeters, and insulation resistance testers (megohmmeters) safely
    Diagnose common control faults including open coils, welded contacts, blown fuses, and loose terminal connections
    Distinguish between control circuit failures, power circuit faults, and mechanical motor/load binding
    Document the troubleshooting steps, test readings, identified root cause, and corrective repair action